ES1-RE-W corner protection profile (PU) with repeatedly repositionable adhesive surface - white - impact protection - warning profile

SKU: SMI-ES1-RE-W
HAN: ES1-RE-W
Category: Warning and protection profiles
Manufacturers: SMI - Gräwe & Sohn GmbH

ES1-RE-W corner protection profile (PU) with repeatedly repositionable adhesive surface - white

Dimensions: 1 m length, suitable for corners
Material: polyurethane foam with PU film, recyclable & CFC-free
Special properties: hardness approx. 45 Shore A, temperature-resistant from -40 °C to +80 °C, fire test DIN EN 13501-1 / Class E, RoHS compliant
Further information: repeatedly repositionable adhesive surface with acrylate adhesive, reusable up to 5 times, optimal processing temperature 15–20 °C

Länge

28,49 €

incl. 19% VAT ,

Available immediately

This item has variations. Please select the requested variation.

Description

Discreet corner and impact protection with repeatedly repositionable adhesive surface – white

The ES1-RE-W corner protection profile provides a reliable solution for protecting vulnerable corners and edges. Made from resistant polyurethane foam, it reliably absorbs even strong impacts and helps protect machines, inventory and people. The white colour provides an unobtrusive appearance and is particularly suitable for work environments or areas where discreet protection is preferred. Thanks to the repeatedly repositionable adhesive surface, the profile can be removed and reattached up to five times – ideal for flexible indoor and outdoor applications.

Technical data:
- Length: 1 m piece
- Material: PU foam with protective PU film
- Hardness: approx. 45 Shore A
- Fire test: DIN EN 13501-1 / Class E
- RoHS compliant according to Directive 2002/95/EC
Adhesive surface:
- High-performance adhesive: light- and ageing-resistant acrylate adhesive
- Adhesive strength: up to 3.0 N/cm
- Removable and reattachable up to five times
- Temperature resistance: -40 °C to +80 °C
- Optimal processing temperature: approx. 15–20 °C
Installation instructions:
1. Cut profile to the desired length (e.g. with a utility knife)
2. Clean the surface thoroughly (free from grease, dust-free, dry)
3. Remove adhesive film
4. Position the profile and press firmly
5. Maximum adhesive strength is reached after approx. 24 hours

Item information	Value
Product safety information:	The products of SMI - Gräwe & Sohn GmbH are developed and manufactured in accordance with the current state of the art. The instructions for use must be observed. When fitting the profiles, the specifications of the manufacturer of the objects to which the profiles are attached must be followed. The user must check and, where necessary, test the suitability of the substrate. The products are intended exclusively as warning and protective profiles (intended use). Any other use is considered improper. We accept no warranty, liability or compensation for damage resulting from improper use. The risks of improper use are borne solely by the user. The images shown are examples; the original products may differ. Dimensions are approximate and colours may vary. Subject to technical modifications.

Product safety information

Manufacturer information:

SMI - Gräwe & Sohn GmbH
Bahnhofstraße 44
Brandenburg
Brandenburg, Deutschland, 14774
info@smi-office.de
https://www.kantenschutzprofi.shop