FS1-D-O surface protection profile (PU) with adhesive surface in orange - impact protection - warning profile - protection profile

SKU: SMI-FS1-D-O
HAN: FS1-D-O
Category: Warning and protection profiles
Manufacturers: SMI - Gräwe & Sohn GmbH

Surface protection profile FS1-D-O – PU impact protection in orange

Dimensions: individually cuttable, flexible length
Material: polyurethane foam with PU protective film, colour orange (similar to RAL 2008 bright red orange)
Properties: hardness approx. 45° Shore A, temperature-resistant from -40 to +100 °C, flame-retardant according to DIN EN 13501-1 Class E
Further information: self-adhesive with high-performance adhesive, easy installation on wood, metal & walls

Länge

from

42,38 €

incl. 19% VAT , plus

Available immediately

This item has variations. Please select the requested variation.

Description

Surface protection profile FS1-D-O – highly visible PU impact protection in orange

The FS1-D-O surface protection profile reliably protects surfaces, machines and inventory against collision damage and at the same time reduces the risk of injury. The robust polyurethane foam with protective PU film absorbs even strong impacts and is ideal for safety-relevant areas. The orange colour (similar to RAL 2008 bright red orange) provides a striking signal effect and increases visibility in workshops, warehouses, production facilities and public areas. Thanks to the self-adhesive backing with high-performance adhesive, the profile can be installed quickly and permanently.

Technical data:
- Material: PU foam with PU protective film
- Colour: Orange (similar to RAL 2008 bright red orange)
- Hardness: approx. 45° Shore A
- Operating temperature: -40 to +100 °C
- Fire test: DIN EN 13501-1 / Class E
- RoHS-compliant according to Directive 2002/95/EC
Adhesive surface:
- Light- and ageing-resistant acrylic adhesive
- Adhesive strength: 21 N/25 mm
- Suitable for wood, metal, walls, non-dusting plaster
- Optimum processing temperature: approx. 15–20 °C
Easy installation:
1. Cut the profile to the desired length (e.g. with a cutter knife)
2. Clean the surface (free from grease, dust-free, dry)
3. Remove the adhesive film and apply the profile
4. Press firmly – full adhesive strength after approx. 24 hours

Item information	Value
Product safety information:	The products of SMI - Gräwe & Sohn GmbH are developed and manufactured in accordance with the current state of the art. The instructions for use must be observed. When fitting the profiles, the specifications of the manufacturer of the objects to which the profiles are attached must be followed. The user must check and, where necessary, test the suitability of the substrate. The products are intended exclusively as warning and protective profiles (intended use). Any other use is considered improper. We accept no warranty, liability or compensation for damage resulting from improper use. The risks of improper use are borne solely by the user. The images shown are examples; the original products may differ. Dimensions are approximate and colours may vary. Subject to technical modifications.

Product safety information

Manufacturer information:

SMI - Gräwe & Sohn GmbH
Bahnhofstraße 44
Brandenburg
Brandenburg, Deutschland, 14774
info@smi-office.de
https://www.kantenschutzprofi.shop